When using a High performance Grout Products with no additional sealing needed
(TEC PowerGrout and Ardex FL Grout)
- Protect the finished installation from foot traffic or impact for at least 4 hours.
- Wait 24 hours before mopping, routine cleaning or shower use.
- Do not expose to stains, complete water immersion or freezing for 7 days.
- No need to seal grout; However, if tile or stone is to be sealed after grout is installed, you should use a compatible solvent based sealer. As always, it is recommended that you test a small area of the tile/stone and grout to ensure you achieve the desired results.
When using a traditional Cement Grout either sanded or unsanded
(TEC AccuColor or Ardex FGC Unsanded)
- Protect the finished installation from traffic or impact for at least 24 hours and from water immersion or freezing for at least 72 hours.
- Sealing grout is recommended.